BadBoys Exterior Set 150ml
BadBoys Shampoo | Orangeade 150ml
Concentrated product for regular washing of vehicles with a fantastic orangeade fragrance. Very efficient, neutral pH.
High foaming formula guarantees high dirt removal efficiency. Leaves no traces. Safe for wax and ceramic coatings.
Product characteristics:
-
hand washing shampoo
-
efficient and highly foaming
-
orangeade fragrance
-
safe for paint, rims, gaskets, glass
-
safe for wax and ceramic coatings
-
it features a component that prevents the formation of the so-called water spots (lime deposits of hard water)
-
neutral pH
-
if applied as recommended, it is safe for cleaned surfaces
Usage:
-
Perform non-contact prewash using active foam or prewash (TFR)
-
prepare the solution by mixing the shampoo with water, with 25 ml of shampoo per 10 l of water
-
we recommend 'two bucket' washing, starting from the roof, heading downwards using a RRC wool glove and buckets with separator
-
rinse the vehicle with water (preferably under pressure) to remove any remaining dirt and debris
-
for a better effect, treat the paintwork with Quick Detailer shining preparation
Recommendations:
-
the shampoo's 'creamy foam' effect can only be achieved by mixing it with water using a pressure washer (pour the shampoo into a bucket and then the pressurised water)
-
before application, make sure that the surface to be cleaned is cool, do not wash car in direct sunlight
-
store in a dry and cool place at 5–25℃
-
do not expose to freezing or overheating
-
do not leave to dry out
-
keep out of reach of children
BadBoys Quick Detailer 150ml
Preparation for instant shine and protection of car paint. It gives the surface a deep shine, slippery and hydrophobic effect. It masks micro scratches, causing the surface to stay clean for longer. A product with a pleasant fragrance.
Product characteristics:
-
ideal for shiny car paintwork
-
for use on cars with sterile paintwork as well as waxes and coatings
-
fills microscratches and cavities on painted surfaces
-
brings out the depth of colour from the painted elements
-
forms a hydrophobic or water repellent coating
-
the product can be applied on both, dry and wet lacquer
-
Quick Detailer is also suitable as a lubricant for clay
-
safe for cleaned surfaces, if applied as recommended
-
preparation is ready to use and does not require dilution
Usage:
-
before applying Quick Detailer paintwork shining preparation, it is recommended to thoroughly prewash the vehicle
-
wet application of Quick Detailer: spray the product with about 20 ml, rinse the excess and dry the surface with a towel; do not allow to dry!
-
application to dry paintwork: use two soft microfibre towels, spray the agent onto the microfibre and rub into the surface, with a second microfibre wipe off the excess of Quick Detailer to achieve shine. Recommended quantity per car: 10–30 ml.
-
apply the product element by element
-
overlapping too much product results in smudges
Recommendations:
-
store in a dry and cool place at 5–25℃
-
do not expose to freezing or overheating
-
before application, make sure that the surface is clean and cool
-
do not apply in direct sunlight and when exposed to wind!
-
keep out of reach of children
BadBoys Wheel Cleaner Bleeding 150ml
Product used for cleaning rims. Effectively penetrates dirt. The product strongly reacts with metallic deposits, which results in an intense, bloody shade of gel. Recommended for heavily soiled rims.
Product characteristics:
-
product dedicated to rim cleaning
-
gel formula allows for longer dirt penetration and slower evaporation
-
on contact with metal particles, it turns to a very bloody colour
-
the product adheres to the wheel surface in the form of an even gel glaze, which makes it flow off the surface longer.
-
safe pH
-
ready to use
-
safe for cleaned surfaces, if applied as recommended
-
neutralised odour (characteristic of other such products)
Usage:
-
shake the bottle before use
-
spray rims generously with the gel
-
for a better effect, use a brush to separate the dirt
-
for dirt that is difficult to remove allow the agent to act on the surface for several minutes
-
rinse with water, preferably under pressure
-
dry the surface with compressed air or clean microfibre for a perfect finish
-
if necessary, repeat the above steps
Recommendations:
-
before first use, test the product in a less visible place
-
protect your skin during application; the product may cause skin irritation;
-
store in a dry and cool place at 10–25℃
-
do not expose to freezing or overheating
-
do not leave to dry out
-
before application, make sure that the surface to be cleaned is cool, do not use in direct sunlight
-
keep out of reach of children
